Colloidal Silver - Tips for Purchase and Production


Not all brands of Colloidal Silver are equal or of the same quality. Select a brand which is produced by the electro-colloidal, non-chemical method.

路Look at the ingredients to see it contains only silver and de-mineralized or distilled water. If the ingredients include a stabilizer or any other trace elements, it might be a good idea to research this product well.

路If it is suggested that the Colloidal Silver be refrigerated, this is an indication of another element present that could spoil. Colloidal Silver needs no refrigeration and should always be protected from freezing.

路The ideal color of Colloidal Silver should be a golden yellow, unless it is produced in concentrated form to be diluted, in which case it may be a dense looking greenish gray with an orange cast in the light. (Concentrated Colloidal Silver should return to the clear, golden yellow after dilution) A darker color could indicate larger particles of silver, or that the water used contains minerals... so check the product out.

路Colloidal Silver should be packaged in amber or cobalt blue glass, and the product should be stored in a cool dark place.

路Question the product if the directions state: 'shake well before using'. Colloidal Silver should not be shaken or stirred.

Colloidal Silver is sold and packaged in a variety of ways. There are sprays and misters; nasal sprayers and droppers; salves and compress solutions.

Colloidal Silver- Particle Surface Area: Other factors to consider when researching a Colloidal Silver product are: Particle Size and Particle Surface Area, if the information is available. Colloidal Silver products which are actually compounds do not accurately reflect the amount of Silver in the product. Also, it is the surface area of the Silver that must be exposed to the bacteria or microbe, and proteins or salts attached to the Silver particle actually block the Silver from it's environment.

So, Particle size is extremely important, but for a reason you may not expect. When it comes to Colloidal Silver, the smaller the particle the better.

Typically, manufacturers of Colloidal Silver list the Silver concentration in ppm's- parts per million. This measurment actually refers to weight; the weight of 1 part silver to a million parts water. If the particles are large, the surface area is actually smaller than if that particle were broken down to smaller particles. Picture a Rubik's Cube. In one piece it has a definite surface area; but take it apart and measure the surface area of the smaller parts; break those down again and so on... and the surface area is multiplied exponentially.

Colloidal Silver Production at Home: There is good reason to purchase a generator and produce your own Colloidal Silver at home. You can control the quality and the price. Colloidal Silver can be made at home for the cost of distilled water and your time. These days Colloidal Silver Generators practically run themselves once they are turned on and will turn themselves off, so your time may not be a factor. There are other generators which may require constant attendance to change the voltage polarity every couple minutes when producing concentrated Colloidal Silver to be diluted into large volumes.